昆明数字高频机 **高频感应加热电源厂家 厂商批发

焊接行业：
1．各种车刀、刨刀、铣刀等机加工刃具的焊接。
2．各种金钢石工具的焊接，如：金钢石锯片、金钢石钻具的焊接。
3．各种一字型钎头、柱齿钎头、燕型煤钻头、铆杆钻头。
4．各种采煤机截齿的焊接、各种掘机截齿的焊接。
5．各种机械用刀具的焊接。
日佳感应加热具有变频功能，可以根据工件智能变频，达到节能的效果。
2、日佳设备全数字化控制，用软件代替了很多硬件控制部分，减少了元件发热，降低了功耗。
3、可以定制智能化加热设备，比如感应器内有工件的时候按照设置好的的功率加热，没有工件自动转换维持机器工作的小电流状态。这样不仅降低了功耗，也减少了操作工的工作强度及频繁启动设备。
4、日佳全数字变频感应加热一般比老式模拟机器节能5%~50%。
4. Saving more Energy
1. Ri Jia products induction heating has the function of frequency conversion, which can achieve energy saving effect according to the intelligent frequency conversion of the workpiece.
2. Digital control system , replace many hardware control parts by software, reduce the heating of components and lower power consumption.
3. We can customize the intelligent heating equipment, when the workpiece is in , it is heated according to the set power, and there is no workpiece ,it will maintain the minimum current state . This function will not only reduce the power consumption, but also reduce the operator's work intensity and the frequency of the start and off of the equipment.
4. Ri Jia products digital frequency conversion induction heating is generally 5%~50% less energy efficient than the old analog machine.

热处理：齿轮、机床导轨、五金工具、气动工具、电动工具、液压件、球墨铸铁、汽摩配、内配等机械金属零件（表面、内孔、局部、整体）的淬火、退火，不锈钢锅制品拉伸。透热成型：标准件、紧固件、大工件、小型五金件、直柄麻花钻、整体、局部透热及麻花钻的热镦热轧、直径100mm以下的圆钢、对金属村料的加热退火以便拉伸、造型、压花、弯管、砸头、钢丝（铁丝）加热制钉、不锈钢制品退火、拉伸、涨型、热膨胀等。

高频机具有加热速度快、效率高、加热均匀和节能等，并且它可以一次同时焊接多个工件，使焊接的效率有所提高，而且氧化面积小、无缺焊和漏焊点。焊接后的工件焊缝也非常牢固饱满。另外，高频炉的应用范围也相当广泛，主要应于各种金属的熔炼、焊接、淬火、退火、透热、热处理、弯管、以及其它应用等，为客户提供了产品的质量和生产的效率，降低了客户的使用成本而且还改变了工作的环境，是新一代的感应加热设备厂家。

寿命长
1、日佳电路设计的逆变电压很低，这样不光是抗恶劣环境也延长了使用寿命。
2、去掉电解滤波电容改用无极薄膜电容，因为电解电容一般寿命在10年左右，而薄膜电容寿命比它要高几倍，大大提高了机器的寿命。
3、可以定制全封闭机器，用十年后内部依然如新。
Durable in use
1. Ri Jia products inverter voltage is very low, so it is not only the anti-harsh environment but also extends the service life.
2. Remove the electrolytic filter capacitor and switch to a non-polar film capacitor, because the electrolytic capacitor generally lives about 10 years, and the life of the film capacitor is several times higher than that, which greatly improves the life of the machine.
3. We can customize the fully enclosed machine, and it will remain new after 10 years.